メインコンテンツにスキップ

手順3に変更

Bryce Zanderさんによる編集

承認済みの編集 : Bryce Zander

変更なし

手順ライン

-[* black] Flip the device back to it's original orientation.
-[* black] Using a #2 screwdriver, remove the three 5/32" x 5/16" screws from the rear of the device as shown.
+[* black] Flip the typewriter back to it's original orientation so that the rear is facing you.
+[* black] Remove the three 7.9mm Philips #2 screws from the typewriter as shown.