| - | [* black] Loosen the goose-neck with an Allan wrench. |
|---|
| - | [* black] After loosening the goose-neck, it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side. |
|---|
| - | [* black] Position the handlebars to your preferred height. |
|---|
| + | [* black] Loosen the goose-neck (adjustable quill stem) with a 6 mm Allen wrench. |
|---|
| + | [* black] After loosening the goose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side. |
|---|
| + | [* black] If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet. |
|---|
| + | [* black] Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance. |
|---|
| + | [* black] Make sure you don't raise quill stem above minimum insert line. |
|---|