手順9に変更
- Jacob Reiterによって編集
承認済みの編集 : Jacob Reiter
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Put the axle and bearings back into the cleaned hub. |
|---|---|
| + | [* black] Make sure that you put the axle in from the side opposite where the sprocket is. |
| + | [* black] If you don't remember, look at your tire. Most tires have an arrow pointing in the direction the wheel turns when you go forward. The axle should go in from the side where the arrow points counter-clockwise |