手順3に変更
- Lynden Millsによって編集
承認済みの編集 : Lynden Mills
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Remove the 6 Phillips #00 exterior screws from the camera. Two are located on the bottom and two are located on either side as shown. Notice that one of the screws is under the AV Out Digital flap on the side. |
|---|---|
| + | [* red] Remove the 6 Phillips #00 exterior screws from the camera. Two are located on the bottom and two are located on either side as shown. Notice that one of the screws is under the AV Out Digital flap on the side. All exterior screws should be 2.4mm in length |