メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順9に変更

David Hodsonさんによる編集

承認の保留中

変更なし

手順ライン

[* black] After removing three more Phillips screws, the motor and controller board can be removed fromThe four motors and their electronic controllers are each held to the central crosscross by six screws and a connector.
[* black] Each brushless motor runs at 28,000 RPM while the AR.Drone is hovering, and as high as 41,400 during full acceleration.
[* black] The speed of the
motor has its own controller board which is fed instructionsmanaged by the motherboard after analyzing data collected from the altimeter, gyroscope,electronic controller, which includes an 8-bit microcontroller and vertical camera, and, of course, user inputa 10-bit ADC.
[* black] After removing three more Phillips screws, the motor and controller board can be removed fromThe four motors and their electronic controllers are each held to the central crosscross by six screws and a connector.
[* black] Each brushless motor runs at 28,000 RPM while the AR.Drone is hovering, and as high as 41,400 during full acceleration.
[* black] The speed of the
motor has its own controller board which is fed instructionsmanaged by the motherboard after analyzing data collected from the altimeter, gyroscope,electronic controller, which includes an 8-bit microcontroller and vertical camera, and, of course, user inputa 10-bit ADC.