メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順7に変更

Matthew Newsomさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Each propeller is made up of the propeller bladeblade, gear, motor and gear driven by a motormotor controller board.
[* black] Each motor has its ownAfter removing the cable connector and the three Phillips screws securing the controller board which gets fed instructions byto the motherboard depending oncentral cross, the data collected fromscrews under the altimeter, gyroscope, and vertical camerapropeller gear still hold the propeller assembler together.
[* black] Each propeller is made up of the propeller bladeblade, gear, motor and gear driven by a motormotor controller board.
[* black] Each motor has its ownAfter removing the cable connector and the three Phillips screws securing the controller board which gets fed instructions byto the motherboard depending oncentral cross, the data collected fromscrews under the altimeter, gyroscope, and vertical camerapropeller gear still hold the propeller assembler together.