メインコンテンツにスキップ

手順2に変更

Mitulさんによる編集

承認済みの編集 : Mitul

変更なし

手順ライン

-[* black] To remove the internal plastic cover, remove the 14 screws with a Tork-5 screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)
-[* icon_note] Orange circles= 4.45mm screws
-[* icon_note] Red circles = 3.6mm screws
-[* black] After removing the screws, gently snap the perimeter clips open, and remove the internal plastic case. (Picture 3669)
+[* black] Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)
+[* orange] 4.45mm Black screws
+[* red] 3.6mm Silver screws
+[* black] Gently snap the perimeter clips open, and remove the internal plastic case.