メインコンテンツにスキップ

手順2に変更

Evan Noronhaさんによる編集

承認済みの編集 : Evan Noronha

変更なし

手順ライン

[* black] Remove the 14 screws with the T-5 Torx screwdriver. (11 black 3.6mm screws, and three 4.45mm screws)
-[* black] NOTE: The silver screws are marked with an "S" or a sticker [S1.6(Silver)] See the corrected image
+[* icon_note] The silver screws are marked with an "S" or a sticker [S1.6(Silver)] See the corrected image
[* orange] 4.45mm Silver screws
[* red] 3.6mm Black screws
[* black] Gently snap the perimeter clips open, and remove the internal plastic case.