メインコンテンツにスキップ

手順1に変更

Sera Mooreさんによる編集

承認済みの編集 : Sera Moore

変更なし

手順ライン

-[* red] Using PH#00 screw driver, remove two 0.145in Phillips head screws.
-[* icon_note] The two Phillips head screws are located on the bottom face of the device near the power and volume controls.
+[* red] Using PH#00 screw driver, remove two 0.145 inch Phillips head screws.
+[* icon_note] The two Phillips head screws are located on the bottom face of the device, near the power and volume controls.