メインコンテンツにスキップ

手順 1 への変更

- Cameron Zellerによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] You should start out with your camera looking like this. You are now holding the back end of the camera and the LCD is on the rear.
[*
red] We will begin by removingUse a PH00 screwdriver to remove the single2.9 mm phillips screw on the upper left side of the case.
[* black] You should start out with your camera looking like this. You are now holding the back end of the camera and the LCD is on the rear.
[*
red] We will begin by removingUse a PH00 screwdriver to remove the single2.9 mm phillips screw on the upper left side of the case.