メインコンテンツにスキップ

手順1に変更

Jarrod Belsickさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Flash Assembly should be loose from taking out the LCD, and all ribbon connectors have already been disconnected.
-[* black] Rotate flash assembly if the flash assembly is not loose.
+[* icon_caution] Before working on the flash assembly make sure the flash is completely discharged or pay attention to where your fingers are. The capacitor in the flash assempbly can hold a charge for a long time and it can shock you.
+[* black] Flash Assembly should be loose from taking out the LCD and all ribbon connectors have already been disconnected.
+[* black] While holding the camera with the lens facing you, carefully lift the flash assembly so the little nub at the top comes out of its groove.