Skip to main content

Changes to Step #1

Edit by James Loy

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Before working on the flash assembly make sure the flash is completely discharged or pay attention to where your fingers are. The capacitor in the flash assempbly can hold a charge for a long time and it can shock you.
[* black] Flash assembly should be loose from taking out the LCD screen and all ribbon connectors have already been disconnectedLift flash assembly up.
[* black] While holding the camera with the lens facing you, carefully lift theRotate flash assembly so the little nub ataway from the top comes out of its groovecamera.
[* black] Flash assembly should be loose from taking out the LCD screen and all ribbon connectors have already been disconnectedLift flash assembly up.
[* black] While holding the camera with the lens facing you, carefully lift theRotate flash assembly so the little nub ataway from the top comes out of its groovecamera.

Image 1

Old Version

New Version

Image 2

Old Version

New Version