メインコンテンツにスキップ

手順12に変更

James Loyさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Lay the camera on its front side.
-[* black] Use finger to press down on camera's metal casing. Using other hand, lift the LCD screen straight up, making sure the LCD screen's ribbon cable slides free of metal casing.
-[* icon_caution] Be very careful with the motherboard. Do not apply a force on the motherboard.
+[* icon_note] Lay the camera on its front side.
+[* black] Use your fingers to press down on camera's metal casing. Using other hand, lift the LCD screen straight up, making sure the LCD screen's ribbon cable slides free of metal casing.
[* icon_reminder] When reassembling, LCD screen ribbon cable must go through its hole before attaching the back metal casing.