メインコンテンツにスキップ

手順11に変更

James Loyさんによる編集

承認の保留中

変更なし

手順ライン

-[* red] On the front side of the camera, there are two more connectors that need to be removed, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
-[* black] Use the Spudger to rotate up the blue ZIF connector. Then pull out the ribbon connector from the camera.
-[* black] Use the Spudger to rotate up the black ZIF connector. Then pull out the ribbon connector from the camera.
+[* red] On the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
+[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull out the ribbon cable straight out.
+[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull out the ribbon cable straight out.