メインコンテンツにスキップ

手順11に変更

James Loyさんによる編集

承認の保留中

変更なし

手順ライン

-[* blue] On the front side there are two more connectors that need to be removed, one black one and one blue one, both located at the bottom below the lens.
-[* black] Use the Spudger to rotate up the black connector. Then pull out ribbon connector from the camera.
-[* black] Use Spudger to unhook the ribbon from the blue connector, and pull ribbon out of connector.
+[* blue] On the front side there are two more connectors that need to be removed, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
+[* black] Use the Spudger to rotate up the black ZIF connector. Then pull out ribbon connector from the camera.
+[* black] Use Spudger to unhook the ribbon from the blue ZIF connector, and pull ribbon out of connector.