メインコンテンツにスキップ

手順11に変更

Jarrod Belsickさんによる編集

承認の保留中

変更なし

手順ライン

-[* violet] On the front side there are two more connectors that need to be removed, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
-[* black] Use the Spudger to rotate up the black ZIF connector. Then pull out ribbon connector from the camera.
-[* black] Use Spudger to unhook the ribbon from the blue ZIF connector, and pull ribbon out of connector.
+[* red] On the front side of the camera, there are two more connectors that need to be removed, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
+[* black] Use the Spudger to rotate up the blue ZIF connector. Then pull out the ribbon connector from the camera.
+[* black] Use the Spudger to rotate up the black ZIF connector. Then pull out the ribbon connector from the camera.

画像1

古いバージョン

新しいバージョン