メインコンテンツにスキップ

手順10に変更

Jarrod Belsickさんによる編集

承認の保留中

変更なし

手順ライン

-[* orange] Using a Phillips #00 Screwdriver remove the one screw that is now visible located at the top right of the back of the camera. Screw has a length of .168" and a diamter of .066"
+[* blue] Using a Phillips #00 Screwdriver remove the one screw that is now visible located at the top right of the back of the camera. Screw has a length of 0.168" and a diamter of 0.066"
[* icon_caution] Once this screw is removed, the camera will lose most of its rigidity, and may want to fall apart. Make sure to hold camera together in order to avoid damage.

画像1

古いバージョン

新しいバージョン