メインコンテンツにスキップ

手順9に変更

Jarrod Belsickさんによる編集

承認の保留中

変更なし

手順ライン

-[* red] Rotate camera upside down to locate the small black ZIF connector located in the middle of the camera.
+[* red] Rotate the camera upside down to locate the small black ZIF connector located in the middle of the camera.
[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Pull the ribbon cable straight out.
-[* black] Orange ribbon cable should be able to be removed from the rest of the camera.
+[* black] Remove the orange ribbon cable from the rest of the camera.