メインコンテンツにスキップ

手順5に変更

Jarrod Belsickさんによる編集

承認の保留中

変更なし

手順ライン

-[* orange] Using a Phillips #00 Screwdriver remove the four screws located underneath where the LCD display used to be. Screws have a length of .1" and a diameter of .054".
-[* blue] Using a Phillips #00 Screwdriver remove one screw from the bottom of the camera. Screw has a length of .088" and a diameter of .066".
-[* violet] Using a Phillips #00 Screwdriver remove one screw from the side of the camera. Screw has a length of .1" and a diameter of .66"
+[* blue] Using a Phillips #00 Screwdriver remove the four screws located underneath where the LCD display used to be. Screws have a length of 0.100" and a diameter of 0.054".
+[* green] Using a Phillips #00 Screwdriver remove one screw from the bottom of the camera. Screw has a length of 0.088" and a diameter of 0.066".
+[* violet] Using a Phillips #00 Screwdriver remove one screw from the side of the camera. Screw has a length of 0.100" and a diameter of 0.660"

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン