メインコンテンツにスキップ

手順4に変更

James Loyさんによる編集

承認の保留中

変更なし

手順ライン

-[* blue] Locate the small blue connector on the back side of the Motherboard and next to the LCD display.
-[* black] Use Spudger to lift up the top of the blue connector piece. Slide out the ribbon (the blue connection piece is attached to the Motherboard).
-[* black] Once the ribbon is removed the LCD can be rotated away from its initial position to reveal more screws underneath.
-[* icon_caution] Do not pull LCD display out or rotate past 90 degrees away from its initial postion, or else you will damage the remaining ribbon that holds the LCD in place.
+[* blue] Locate the small blue connector on the back side of the motherboard and next to the LCD screen.
+[* black] Use Spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
+[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
+[* icon_caution] Do not pull LCD screen out or rotate past 90 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.