メインコンテンツにスキップ

手順 2 への変更

- Terrenceによって編集

承認済みの編集 : Terrence

削除
追加
変更なし

手順ライン

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try tothis does not work, gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard infor later steps.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try tothis does not work, gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard infor later steps.

画像2

古いバージョン

新しいバージョン

画像3

古いバージョン

新しいバージョン