手順6に変更
- Jonathan Fishによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Fine tune the derailleur by tightening or loosening the barrel adjuster screw located where the cable and cable housing meet the derailleur.Loosening |
|---|---|
| + | [* red] Fine tune the derailleur by tightening or loosening the barrel adjuster screw, located where the cable and cable housing meet the derailleur. Loosening it it causes the derailleur to move slightly towards a larger gear, while tightening it moves the derailler towards a smaller gear. |
| [* black] Shift through each gear while pedaling. The derailleur should move one gear every time you shift up or down on the shifter. | |
| [* black] If the chain skips or makes noise when not shifting, use the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to the number the shifter displays. | |
| [* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise. |