メインコンテンツにスキップ

手順3に変更

Andrew Saundersさんによる編集

承認済みの編集 : Andrew Saunders

変更なし

手順ライン

-[* black] Use a 7/16 inch hex key or 7/16 inch wrench to remove the two remaining 75mm bolts.
-[* icon_note] Make sure not to lose the metal bar linking the two bolts.
-[* black] After removing the 75mm bolts, remove the muffler from the engine block by simply pulling it away. It should be able to move willingly.
+[* black] Use a socket wrench with a 7/16" hex bit or 7/16" wrench to remove the two remaining 75mm screws.
+[* icon_note] Make sure not to lose the metal bar linking the two screws.