メインコンテンツにスキップ

手順3に変更

Tim Wirtzさんによる編集

承認済みの編集 : Tim Wirtz

変更なし

手順ライン

-[* black] Use a 7/16 inch hex key or 7/16 inch wrench to remove the two remaining bolts.
+[* black] Use a 7/16 inch hex key or 7/16 inch wrench to remove the two remaining 75mm bolts.
[* icon_note] Make sure not to lose the metal bar linking the two bolts.
-[* black] After removing the bolts, remove the muffler from the engine block by simply pulling it away. It should be able to move willingly.
+[* black] After removing the 75mm bolts, remove the muffler from the engine block by simply pulling it away. It should be able to move willingly.