メインコンテンツにスキップ

手順3に変更

Tim Wirtzさんによる編集

承認済みの編集 : Tim Wirtz

変更なし

手順ライン

[* black] Use a 7/16 inch hex key or 7/16 inch wrench to remove the two remaining bolts.
-[* black] Make sure not to lose the metal bar linking the two bolts.
-[* black] After removing the bolts, remove the muffler from the engine block.
+[* icon_note] Make sure not to lose the metal bar linking the two bolts.
+[* black] After removing the bolts, remove the muffler from the engine block by simply pulling it away. It should be able to move willingly.