メインコンテンツにスキップ

手順 3 への変更

- Brandonによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Gently slide the circuit board out away from the port connections. Pull it toward where the lens used to be. Some wiggling may be necessary to remove.
[* icon_caution] BE CAREFUL, theThe circuit board is fitted into slots attached to the side of the camera. Do not angle upwards to remove.
[* icon_caution] BE CAREFUL, theThe circuit board is fitted into slots attached to the side of the camera. Do not angle upwards to remove.