メインコンテンツにスキップ

手順3に変更

Brandonさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Gently slide the circuit board out away from the port connections. Some wiggling may be necessary to remove.
-[* red] BE CAREFUL, the circuit board is fitted into slots attached to the side of the camera.
+[* black] Gently slide the circuit board out away from the port connections. Pull it toward where the lens used to be. Some wiggling may be necessary to remove.
+ [* red] BE CAREFUL, the circuit board is fitted into slots attached to the side of the camera. Do not angle upwards to remove.