手順9に変更
- Jacob Valdezによって編集
承認済みの編集 : Jacob Valdez
- 前
- 後
- 変更なし
手順ライン
| [* black] Flip bike back right-side-up. | |
| [* black] Slide the connector up near the housing holder. About an inch between the connector and holder should be fine. | |
| - | [* black] Cut the extra cable so only about an inch remains. |
| + | [* black] Using the smart wrench and 10mm socket wrench, tighten the nut so it grips the brake line firmly. |
| + | [* black] Using wire-cutters, cut the extra cable so only about an inch remains. |