メインコンテンツにスキップ

手順1に変更

Christopherさんによる編集

承認済みの編集 : Christopher

変更なし

手順ライン

-[* icon_caution] Because of the protruding joystick on the top of the controller, make sure to work on a soft surface, or prop the controller up to avoid stress on the joystick.
+[* icon_caution] Because of the protruding joystick on the top of the controller, make sure to work on a soft surface or prop the controller up to avoid stress on the joystick.
[* black] Place the controller face down (buttons and joystick down).
[* red] Use a Phillips Head #1 screwdriver to remove the eight 9.65mm screws located on the felt and metal backplate.
[* icon_note] Do not confuse the four screws in the rubber feet with the eight screws in the felt. The screws in the feet do not need to be removed.