メインコンテンツにスキップ

この手順に変更

Matthew Weemanさんによる編集

承認済みの編集 : Matthew Weeman

変更なし

手順ライン

-[* black] Using the flat end of the heavy-duty spudger, carefully lift the black tab that holds the leftmost ribbon cable in place.
-[* black] Using your fingers, slide the cable straight out of the connector.
-[* red] Repeat this process for the other two ribbon cables covering the battery.
+[* black] Using the flat end of the heavy-duty spudger, carefully lift the black tab that holds the leftmost black ribbon cable in place.
+[* black] Using your fingers, gently slide the cable straight out of the connector.
+[* red] Repeat this process for the other two ribbon cables, one black and one gold, covering the battery.