メインコンテンツにスキップ

この手順に変更

Amy Tsaiさんによる編集

承認済みの編集 : Amy Tsai

変更なし

手順ライン

-[* black] Using flat end of heavy-duty spudger, carefully lift the black tab that holds the leftmost ribbon cable in place.
+[* black] Using the flat end of the heavy-duty spudger, carefully lift the black tab that holds the leftmost ribbon cable in place.
[* black] Using your fingers, slide the cable straight out of the connector.
[* red] Repeat this process for the other two ribbon cables covering the battery.