手順8に変更
- Kristen Gismondiによって編集
承認済みの編集 : Kristen Gismondi
- 前
- 後
- 変更なし
手順ライン
| [* black] Put the tire with the new tube inside back on the rim. | |
| [* icon_note] Inflate the tube slightly to make it easier to insert inside the tire prior to attatching the tire and tube combo back on the rim. | |
| [* red] Make sure the hole in the rim lines up with the valve on the tube properly. | |
| - | [* icon_caution] Avoid a |
| + | [* icon_caution] Avoid a misaligned valve. This can cause the valve to break internally as the rubber will be cut around the valve stem by the wheel where the valve protrudes from the rim. |