メインコンテンツにスキップ

手順3に変更

Brad Washさんによる編集

承認済みの編集 : Brad Wash

変更なし

手順ライン

-[* black] Simply tilt the mower on its side and pour the old oil into a proper container.
+[* black] To remove the oil, simply tilt the mower on its side and pour the old oil into a proper container.
[* black] Once all the oil is drained from your mower, tilt everything right-side-up and refill the engine with oil by pouring directly into the hole.
[* icon_note] Note: It can be helpful to use a funnel to ensure that the oil does not spill over the outside of your engine. Spilled oil can be difficult to clean up.