修理を始めるには コミュニティ ストア

手順1に変更

- Noah Berglundによって編集

承認済みの編集 : Noah Berglund

前
後
変更なし

手順ライン

[title] Removing the Case Screws
-[* red] Remove rubber stand from the lower portion of the device. Use a phillips head screw driver, size (PH00 or PH0) to remove the six screws located under the rubber stand. The two band screws being 6.97 mm and four case screws being 9.11 mm in length.
-[* red] Use the rubber tool to remove the speaker.
-[* light_blue] Remove the screws on the back of the pill.
+[* red] Using the spudger, create space between the speaker covers and then remove.
+[* red] On the underside of the device, remove the rubber stand with the BeatsPill logo on it.
+[* light_blue] Using a Philips #0 Screwdriver that is ESD-safe. Remove the 4 screws circled in blue that were underneath the rubber stand.