手順1に変更
- Paul Haasによって編集
承認済みの編集 : Evan Noronha
- 前
- 後
- 変更なし
手順ライン
| [title] Removing the Case Screws | |
| - | [* red] Remove rubber stand from the lower portion of the device. Use a phillips head screw driver, size (PH00 or PH0) to remove the six screws located under the rubber stand. |
| + | [* red] Remove rubber stand from the lower portion of the device. Use a phillips head screw driver, size (PH00 or PH0) to remove the six screws located under the rubber stand. The two band screws being 6.97 mm and four case screws being 9.11 mm in length. |