メインコンテンツにスキップ

手順2に変更

Cri Criさんによる編集

承認済みの編集 : Cri Cri

削除済み
追加
変更なし

手順ライン

[title] Open the Joystick
[* icon_note] Please take a moment and note how your joystick is assembled and all the parts that can be dettached. I recommend to make a few photos before dismanteling it.
[* black] With the Phillips screwdrive unscrew the #1 to #4 screws in Fig. 1.
[* black] Using the Torx T10 head, unscrew the #5 (Fig. 1), #6, #7 and #8 screws (Fig. 2)
[* icon_caution] Screws 5 & 6 have a larger thread pace than 7 & 8, although the heads are the same. So please take care when you screw them back on.
[* black] Using your hand, unscrew #9 (Fig. 2). Please note that you cannot completely remove this screw, but you don't need to do this anyway.
[* icon_caution] Carefully remove the plastic bracket and the support holding the "Pinky trigger" (Fig. 3). '''DO NOT''' force its removal, or you can break it.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加