手順3に変更
- Kevin Scottによって編集
承認済みの編集 : Kevin Scott
- 前
- 後
- 変更なし
手順ライン
| [* black] Release the two cables by lifting up their respective clips with a spudger. | |
| - | [* icon_note] These pictures were taken after the connector ribbons were released. It is difficult to show the connector ribbons while the two pieces of the camera are still connected. You will need to release the connector ribbons while the camera is still in one piece before you can separate it like the pictures. |
| + | [* icon_note] These pictures were taken after the connector ribbons were released and the camera was separated into two parts. It is difficult to show the connector ribbons while the two pieces of the camera are still connected. You will need to release the connector ribbons while the camera is still in one piece before you can separate it like the pictures. |