手順1に変更
- Kevin Scottによって編集
承認済みの編集 : Kevin Scott
- 前
- 後
- 変更なし
手順ライン
| [* black] Remove all the marked screws. | |
| [* black] Separate the two parts of the body of the camera slightly. | |
| - | [* black] Make sure not to pull too hard because there are connector wires. |
| + | [* icon_caution] Make sure not to pull too hard because there are connector ribbons. |
| + | [* black] Detach the connector ribbons before fully separating into two pieces. |