メインコンテンツにスキップ

手順2に変更

Simon Krauterさんによる編集

承認済みの編集 : Simon Krauter

変更なし

手順ライン

[title] Disconnect silver ribbon
[* black] Use the metal tweezers or your fingers to pull upgrip the silver ribbon close to the pin connector on the plasticmotherboard.
[* black] Gently pull the plastic
tab onparallel to the silver ribbondevice, and disconnectwork it back and forth until the silver ribbon disconnects from the pin connector attached to the motherboard.
[* icon_caution] Be very careful to pull along the device, not away from the device. It is possible to damage the pin connector in this step.
[* black] Use the metal tweezers or your fingers to pull upgrip the silver ribbon close to the pin connector on the plasticmotherboard.
[* black] Gently pull the plastic
tab onparallel to the silver ribbondevice, and disconnectwork it back and forth until the silver ribbon disconnects from the pin connector attached to the motherboard.
[* icon_caution] Be very careful to pull along the device, not away from the device. It is possible to damage the pin connector in this step.