メインコンテンツにスキップ

手順2に変更

Jeff Suovanenさんによる編集

承認済みの編集 : Jeff Suovanen

変更なし

手順ライン

[* black] Use the flat end of a spudger or your fingernail to flip up the clear protective flap on the ribbon cable ZIF socket.
[* black] Using the flat end of a spudger or your fingernail, liftflip up the white bar 90° (this unlocksthin portion of the black ZIF connector, allowing youconnector (opposite of the side where the cable inserts) to removerelease the cable from its socket). Slide the cable out of the black ZIF socket.
[* icon_caution]
DO NOT PRY the Black ZIFsocket on the side where the cable inserts, or you may break the entire socket off the mother boardmotherboard.
[* black] Slide the cable out of the ZIF socket
.
[* black] Using the flat end of a spudger or your fingernail, liftflip up the white bar 90° (this unlocksthin portion of the black ZIF connector, allowing youconnector (opposite of the side where the cable inserts) to removerelease the cable from its socket). Slide the cable out of the black ZIF socket.
[* icon_caution]
DO NOT PRY the Black ZIFsocket on the side where the cable inserts, or you may break the entire socket off the mother boardmotherboard.
[* black] Slide the cable out of the ZIF socket
.
[* icon_note] For more info on how to disconnect ZIF connectors, check out the [guide|25629|Recognizing & Disconnecting Cable Connectors guide|stepid=64969|new_window=true].