メインコンテンツにスキップ

手順2に変更

Jeff Suovanenさんによる編集

承認済みの編集 : Jeff Suovanen

変更なし

手順ライン

[* black] Use the flat end of a spudger/yourspudger or your fingernail to flip up the clear protective flap on the ribbon cable ZIF socket. Use
[* black] Using
the flat end of a spudger/your fingernail tospudger or your fingernail, lift the white bar 90°, this allows removal of90° (this unlocks the black ZIF connector, allowing you to remove the cable from the black ZIF socketits socket). Slide the cable out of the black ZIF socket. DO NOT PRY the Black ZIF socket off the mother board.
[*

[*
icon_note] For more info on how to disconnect ZIF connectors, check out the [guide|25629|Recognizing & Disconnecting Cable Connectors guide|stepid=64969|new_window=true].
[* black] Use the flat end of a spudger/yourspudger or your fingernail to flip up the clear protective flap on the ribbon cable ZIF socket. Use
[* black] Using
the flat end of a spudger/your fingernail tospudger or your fingernail, lift the white bar 90°, this allows removal of90° (this unlocks the black ZIF connector, allowing you to remove the cable from the black ZIF socketits socket). Slide the cable out of the black ZIF socket. DO NOT PRY the Black ZIF socket off the mother board.
[*

[*
icon_note] For more info on how to disconnect ZIF connectors, check out the [guide|25629|Recognizing & Disconnecting Cable Connectors guide|stepid=64969|new_window=true].