Skip to main content

Changes to Step #2

Edit by Andres Perez

承認済みの編集 by Andres Perez

Deleted
Added
Unchanged

Step Lines

[title] Remove the Metallic Panel
[* red] Using a Phillips #00 precision screwdriver, remove the five 3mm screws.
[* black] Using a plastic opening tool, slowly lift up the entire metal piece from the back of the camera.
[* icon_note] If the panel has never been removed from the cameracamera before, it will be glued firmly to the back panel and will require some force to remove it safelyremove. To prevent breaking the back panel, work the plastic opening tool under different areas of the entire metal piece in different areasplate until it is easy to pop outcompletely released.
[* orange] There are two small magnetic piecesblocks housed underneath the metallic piece. If they do come offplate. These are for securing the panel during the removal process, just slide them back where they wereswivel screen in place while it is closed.
[* icon_note] If the panel has never been removed from the cameracamera before, it will be glued firmly to the back panel and will require some force to remove it safelyremove. To prevent breaking the back panel, work the plastic opening tool under different areas of the entire metal piece in different areasplate until it is easy to pop outcompletely released.
[* orange] There are two small magnetic piecesblocks housed underneath the metallic piece. If they do come offplate. These are for securing the panel during the removal process, just slide them back where they wereswivel screen in place while it is closed.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted