メインコンテンツにスキップ

手順1に変更

Victoria Leppoldさんによる編集

承認済みの編集 : Victoria Leppold

削除
追加
変更なし

手順ライン

[title] Remove the LCD Screen
[* red] Using a Phillips #00 precision screwdriver, remove the four 1mm screws that are holding the black supports to the panel.
[* orange] Carefully peel off the black ribbon from the metallic panel, being sure to removeRemove the little ribbon tab from the contact pad using tweezers or your fingersfingers, then peel off the black ribbon from the metallic panel.
[* orange] Carefully peel off the black ribbon from the metallic panel, being sure to removeRemove the little ribbon tab from the contact pad using tweezers or your fingersfingers, then peel off the black ribbon from the metallic panel.
[* black] Feed the ribbon through the slot on the back panel to free the LCD Screen. You need to bend the ribbon to get the small tabs through it.