メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順3に変更

Winthrop Townsendさんによる編集

承認済みの編集 : Winthrop Townsend

変更なし

手順ライン

[title] Lens Casing Detachment
[* red] Locateunscrew the four 16mm Phillips screws and unscrew them using the Phillips #0 screw driver.
[* orange] LocateUnscrew the two 13mm Phillips screws and unscrew them using the Phillips #0 screw driver.
[* red] Locateunscrew the four 16mm Phillips screws and unscrew them using the Phillips #0 screw driver.
[* orange] LocateUnscrew the two 13mm Phillips screws and unscrew them using the Phillips #0 screw driver.
[* black] Gently remove the entire lens casing from it's position.
[* icon_note] While storing these screws, make sure not to mix the sizes together. When reassembling the projector, the screws need to be returned to their respective locations.