手順17に変更
- Andrew Optimus Goldheartによって編集
承認済みの編集 : Andrew Optimus Goldheart
- 前
- 後
- 変更なし
手順ライン
| [* black] Alright, that's enough. This construction is more than a little ridiculous. Waiter! There's a screw in my tape! | |
| [* black] After some screwy disassembly, we free the I/O board and find: | |
| - | [* red] Realtek RTS5249 |
| - | [* orange] Texas Instruments [http://www.ti.com/lit/ds/symlink/tps2544.pdf|TPS2544|new_window=true] USB |
| - | [* yellow] Parade [http://www.paradetech.com/products/usb-repeaters/ps8713/|PS8713B|new_window=true] |
| + | [* red] Realtek RTS5249 card reader controller |
| + | [* orange] Texas Instruments [http://www.ti.com/lit/ds/symlink/tps2544.pdf|TPS2544|new_window=true] USB charging port controller and power switch |
| + | [* yellow] Parade [http://www.paradetech.com/products/usb-repeaters/ps8713/|PS8713B|new_window=true] single port USB 3.0 repeater/redriver |