メインコンテンツにスキップ

この手順に変更

- Tom Verhoeffによって編集

承認済みの編集 : Sam Goldheart

削除
追加
変更なし

手順ライン

[* black] The next stepStep 5 suggest to remove the strips on the long sides of the glass plate, by prying the glue loose. However, the ends near the hinge are not glued; theyglued and have a tab that slides under the back edge. You can be bend each strip up with a knife near the hinge, and slip itthe tab from underneath the back edge. The strip then lies on top of the back edge.
[* black] The next stepStep 5 suggest to remove the strips on the long sides of the glass plate, by prying the glue loose. However, the ends near the hinge are not glued; theyglued and have a tab that slides under the back edge. You can be bend each strip up with a knife near the hinge, and slip itthe tab from underneath the back edge. The strip then lies on top of the back edge.