メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Tom Verhoeffさんによる編集

承認済みの編集 : Sam Goldheart

削除済み
追加
変更なし

手順ライン

[* black] Firstly turn over the scanner and remove the three3 screws on the back of your scanner which are covered by plastic dark Greygrey oval stripsstrips (2 at extremes, 1 in center; the 2 covers in between these can be ignored). This is so you don't have to turn the scanner over latter when parts may fall out. These screws hold the metal 'spine' in place.
[* black] Firstly turn over the scanner and remove the three3 screws on the back of your scanner which are covered by plastic dark Greygrey oval stripsstrips (2 at extremes, 1 in center; the 2 covers in between these can be ignored). This is so you don't have to turn the scanner over latter when parts may fall out. These screws hold the metal 'spine' in place.