メインコンテンツにスキップ

手順 2 への変更

- danによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] 1. Firstly turn over the scanner and remove the three screws on the back of your scanner which are covered by plastic dark Grey oval strips. This is so you don't have to turn the scanner over latter when parts may fall out. These screws hold the metal 'spine' in place.
[* black] 1. Firstly turn over the scanner and remove the three screws on the back of your scanner which are covered by plastic dark Grey oval strips. This is so you don't have to turn the scanner over latter when parts may fall out. These screws hold the metal 'spine' in place.