メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順2に変更

danさんによる編集

承認の保留中

変更なし

手順ライン

[* black] The metal 'spine' you are going to re-shape is under1. Firstly turn over the scanner and remove the grey plastic rail withthree screws on the 'cog teeth' thatback of your scanner which are covered by plastic dark grey oval strips. This is so you don't have to turn the scanner over latter when parts can see insidefall out. These screws hold the scannermetal 'spine' in place.
[* black] The metal 'spine' you are going to re-shape is under1. Firstly turn over the scanner and remove the grey plastic rail withthree screws on the 'cog teeth' thatback of your scanner which are covered by plastic dark grey oval strips. This is so you don't have to turn the scanner over latter when parts can see insidefall out. These screws hold the scannermetal 'spine' in place.