手順1に変更
- Sam Goldheartによって編集
承認済みの編集 : Sam Goldheart
- 前
- 後
- 変更なし
手順ライン
| [title] Remove Case Screws | |
| - | [* icon_ |
| + | [* icon_note] After removing all four propellors, flip the drone over. |
| [* black] Remove the following screws from the underside of the drone: | |
| - | [* red] |
| - | [* green] |
| + | [* red] Twelve 2.0 mm hex screws |
| + | [* green] Four Phillips #0 screws |